Leading Company Specializes In Supplying China Truck Spare Parts

Home > Knowledge > Content
- Jul 20, 2018 -

What are the points for attention?

1:The tension force of the tension wheel can not be too small, which will make the friction between the belt and the work wheel smaller and eventually cause the belt to slip. Similarly, tension wheel tension can not be too large, excessive tension will increase the belt load, resulting in damage to the belt, while causing damage to the bearing of the wheel.

2:The tension wheel should be placed in the inner side of the loose side, so that the belt is only subjected to one-way bending, and at the same time, it should be close to the large wheel as far as possible so as not to affect the wrapping angle of the small wheel too much. If the tension wheel is placed outside the loose side, it should be as close to the small belt wheel as possible. The size of the wheel groove of the tension wheel is the same as that of the belt pulley, and the diameter is smaller than the diameter of the small pulley.